Navigating Fire Marshal Inspections: A Guide for Businesses

Fire marshal inspections can seem daunting, but they play a crucial role in ensuring the safety of your business premises, employees, and customers. These inspections verify compliance with local fire codes, aiming to reduce the risk of fire-related incidents. Failing an inspection can lead to fines, operational interruptions, or even legal consequences. However, with the right preparation, passing a fire marshal inspection can be straightforward. Here’s how your business can prepare for and successfully navigate these inspections.

Understand the Fire Code
The first step in preparing for a fire marshal inspection is understanding the fire code regulations applicable to your area. Fire codes are based on national standards, such as those set by the National Fire Protection Association (NFPA), but can vary locally. Familiarize yourself with these codes to understand what inspectors are looking for and ensure your business complies.

Pre-Inspection Checklist
A thorough pre-inspection can highlight areas that need attention before the official visit. Consider the following checklist to guide your preparation:

  1. Accessibility of Fire Safety Equipment
    Ensure fire extinguishers, hose reels, and other fire-fighting equipment are easily accessible, clearly marked, and fully operational.
  2. Smoke Detectors and Fire Alarm Systems
    Test smoke detectors and fire alarm systems to confirm they are working correctly. Regular maintenance records for these systems should be up-to-date and readily available.
  3. Clear Exit Routes
    Emergency exits should be clearly marked, well-lit, and free from obstructions. Regular drills can also help ensure that evacuation plans are effective and well-understood by all employees.

    – An exit access/egress point must be at least 28 inches (71.1 cm) wide at all points.

  4. Electrical Safety
    Inspect electrical panels, cords, and outlets for potential hazards like overloading or frayed wires. Ensure that extension cords are used appropriately and are not a permanent solution.
  5. Storage of Flammable Materials & Liquids
    Store flammable materials according to fire code regulations, ensuring they are properly labeled and kept away from ignition sources.

    – Storage Cabinets: Flammable liquids should be stored in approved storage cabinets. These cabinets are designed to limit the internal temperature when exposed to fire. OSHA regulations specify that not more than 60 gallons of Category 1, 2, or 3 flammable liquids, nor more than 120 gallons of Category 4 flammable liquids may be stored in a storage cabinet.
    – Storage Rooms: If the quantity of flammable liquids exceeds what is permissible in storage cabinets, they should be kept in a designated storage room. These rooms must meet specific construction standards, such as fire-resistant walls and self-closing, fire-rated doors. They should also be equipped with proper ventilation to prevent the accumulation of fumes.
    – Ventilation: Proper ventilation is crucial in areas where flammable liquids are stored or used to prevent the accumulation of flammable vapors.
  6. Fire Doors and Sprinkler Systems
    Check that fire doors are operational and not blocked. If your premises are equipped with a sprinkler system, ensure it’s not obstructed and is in working order.

Sprinkler systems should be inspected and maintained. Ensure systems are not being “loaded”. This is when a system has a large accumulation of dust and debris which can affect it’s discharge.

EXAMPLE OF A “LOADED” SYSTEM:

During the Inspection
Be Cooperative and Prepared
Being present during the inspection allows you to provide necessary access, clarify operations, and discuss findings directly. Keep all related documents, such as maintenance records and evacuation plans, at hand.

Address Issues Promptly
If the fire marshal identifies issues, seek clarity on how to address them and act promptly to make corrections. Demonstrating a commitment to safety can also reflect positively on your business.

After the Inspection
Implement Changes
Implement any required changes as soon as possible. If serious violations are found, it may be beneficial to hire professionals to ensure compliance with fire safety standards.

Schedule a Follow-Up
If a follow-up inspection is necessary, schedule it once all corrections are made. This demonstrates your commitment to compliance and safety.

Maintain Compliance
Fire safety is an ongoing responsibility. Regularly review your practices, conduct drills, and keep an eye on any changes in fire safety regulations to ensure continuous compliance.

Published 04/03/2024